We've been succesfully using stm32flash in the past to flash our STM32 MCU that are attached to Raspberry Pi servers (no desktop or X). As we moved on to STM32G0 it seems that stm32flash is no longer working and we are forced to use STM32CubeProg to ...
Hello ST Community,This is the issue I'm facing when trying to connect to my board. I'm able to use the LINUX GUI to connect to the device and program it. No issues with it. I want to do the same using a script and the CLI doesn't seem to co-operate....
Hi,USB DFU did not work in STM32CubeProgrammer in Linux. The programm did not detect the usb port. But it works faultless in STM32CubeProgrammer in windows.I tested with STM32CubeProgrammer V2.10 and 2.12, same results.I have linux mint 20.3 Luna
Hi: I've installed STM32CubeProgrammer and when connecting to the STLink debug programmer it worked ok. But now, it just crashes. I've tested three different probes, on two different computers.Both computers are running Linux (Arch Linux), kernel ver...
:-1: error: /home/serg/STMicroelectronics/STM32Cube/STM32CubeProgrammer/api/project/Qt/STM32CubePrgAPI/../../../../lib//./libQt5Xml.so.5: undefined reference to `QXmlUtils::isPublicID(QString const&)@Qt_5_PRIVATE_API'Qt Creator 4.7.1Based on Qt 5.11....
Hello,after some fiddling, I can run STM32CubeProgrammer and I can see/update/connect to the stlinkv2 on nucleo boards. On the same machine, I can also connect to a STLINKV3 when running STM32CubeProgrammer/windows in a virtual box. However STM32Cube...
Posted on April 12, 2018 at 16:55Using the app on Linux I found out it must have messed up with udev rules.I found this file in '/etc/udev/rules.d/50-usb-conf.rules':SUBSYSTEMS=='usb', ATTRS{idVendor}=='0483', GROUP='users', MODE='0666'However that ...