Hello, I am trying to regress from RDP2 on my STM32U585AII6. I have no problem doing this from the STM32CubeProgrammer GUI, but when I try using the STM32_Programmer_CLI software I get:.\STM32_Programmer_CLI.exe -c port=SWD mode=UR -unlockRDP2 0xHigh...
(Project meant to run on STM32L4R9I-EVAL attached)Ultimately, I am trying to put my device into DFU mode by having the device erase its own flash and reboot into system memory (the erase and reset code executes from RAM). Then flash firmware to the d...
This is the text from the manual:For more information about the device option bytes, refer to the dedicated section in the programming manual and reference manual, both available on www.st.com.
BackgroundHardware:STM32L4R9ZGJ6 (1 MB flash)Custom boardSoftware:STM32CubeIDE v1.6.1STM32CubeProgrammer v2.8.0Hello,I have a couple questions.Question 1: What is the difference between the user configuration option bits DB1M and DBANK?According to t...