About shiwasreet

shiwasreet · 2024-08-07

Hello everyone, this is the command i sent : C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin>STM32_Programmer_CLI.exe -c port=COM3 br=115200 rts=high -u 0x08010800 2048 D:\SystemFiles\Chunks\chunk1.bin and this is the response i...

shiwasreet · 2024-08-06

Hello everyone, I'm sending the command"C:\Program Files\STMicroelectronics\STM32Cube\STM32CubeProgrammer\bin>STM32_Programmer_CLI.exe -c port=COM3 br=9600 rts=high -w C:\BinFiles\FirmwareLoader.bin 0x08005000 -v"from STM32Programmer CLI. Sometimes i...

shiwasreet · 2024-05-14

I executed this command : STM32_Programmer_CLI.exe -c port=SWD sn=xxxxxxxxx232xxxxxxxxxxxx and got the response that gave me details about the device, but not COM Port. Is there any command that gives me the COM Port number to which my device is conn...

shiwasreet · 2024-08-21

Hello @Maryem ,It's a jig test with a couple of different types of boards in it. Yes, it's a custom board with STM chip on it. Thanks for your reply, it answers my question.ThanksShiwa

shiwasreet · 2024-08-19

That's alright Maryem, I've found other approaches to deal with this issue. Still, my questions remain the same. If you can, please answer them. If not, that's alright. The Questions : What does "Error: Read Serial Response timed out." mean ? ...

shiwasreet · 2024-08-07

STM32L471. I tried using 115200 before, but the frequency of errors I'm getting is a bit less in 9600. But it's the same error I get in 115200 as well. Just letting you know that I've been using serial pins for this device, not SWD port. So, I set th...

shiwasreet · 2024-05-21

Hey Aziz, thanks for your reply. As I've already mentioned in my question, i've already tried the "-l uart" command, it gives information about all the connected probes. I have more than 50 devices connected to my computer, so that command isn't real...

shiwasreet · 2024-05-07

Maybe try setting the boot pin high. in my case, i set the rtsEnable to high and dtrEnable to high and then low and then send "7F" command. if it replies back "79", it's in boot mode. maybe different as per your board.

User statistics

User Activity

Error: Read Serial Response timed out.

Reemission of GetID command. STM32CubeProgrammer CLI.

Is there any CLI Command to get the COM Port number of my ST-Link device from it's SN ?

Re: Error: Read Serial Response timed out.

Re: Error: Read Serial Response timed out.

Re: Reemission of GetID command. STM32CubeProgrammer CLI.

Re: Is there any CLI Command to get the COM Port number of my ST-Link device from it's SN ?

Re: Use ST32_Programmer_CLI for monitoring the serial port.