Hello guys I hope you can help me with my problem regarding my adaptation of sbsfu.I'm currently adapting the stm32f413h-discovery example project on a stm32429zi. Everything works fine with one mayor exeption. I have difficulty downloading a new fir...
Hi,I need to generate option byte file(.s19) which is enabled Read out Protection for STM32F4. The reason is to program this .s19 file using non ST programmer in production environment. May i which ST Tool should i used to generate option byte file...
Hi there, I'm new to the STM32 MCU and simulating RSA encryption-decryption on Proteus 8 now. Currently I am using the x-cube-crypto and STM32F401RE-Nucleo to do simulation. The source code is from:nickfox-taterliIn the Proteus 8 I chose a board of S...
I'm running SPI with DMA and CRC enable between two stm32, slave is stm32f415 MCU.Sometimes it appears that data received is corrupted whereas CRC check gives no error. For instance (polynomial used is 0x1021)Normal behavior:3 words sent: 0xAAA0; 0x0...
I'm using STM's cryptographic library on a STMf412ret6 to encrypt a 16 byte message using a 2048 bit public key generated by the Python-RSA 4.8 library, first result on google for "python rsa".I've verified the key being received by the MCU is identi...
Hi All,Did Someone use AES encryption/Decryption in STM32F407?, because I'm using existing example of AES encryption and its not working on my board, EN bit isn't enableing.
Dear Team,I want use inbuild AES encryption engine to encrypt the data, therefore I used CubeMX to initialize the AES engine, when i'm going to encrypt the payload, it stuck in static HAL_StatusTypeDef CRYP_WaitOnOFNEFlag(CRYP_HandleTypeDef *hcryp,...
I tried disable ROP level 1 to level 0 by ST-LINK Utility and STM32CubeProgrammer, but it is not success.Thanks in advance.
I have download the TM32CubeExpansion_Crypto_V4.0.1 library. The folder structure doesn't look like the one represented in the UM1924 document. There is no AccHw_Crypto folder and no STMF1 to STMF4 folders nowhere.Is there support for AES HW accelera...
Hello,I am trying yo implement the HW encryption acceleration on a STM32F423CH for AED CCM Mode. I tried to implement on the first place the CTR encryption mode but it seems to me that the example provided in the NIST Special Publication 800-38A cann...
