Hi,I want to enable or disable the USB-C PD stack of my DRP device during operation. What is the right way?I tried this for disabling:USBPD_CAD_PortEnable(0, USBPD_CAD_DISABLE); USBPD_PE_Request_HardReset(0);And I tried to enable again afterwards wit...
Hi,I didn't find any information about e-mark cable in the link below, Have ST developed the code for the e-mark cable？st.com/content/st_com/en/ecosystems/stm32-usb-c.html
Hi,We use a STM32G071 with the USBPD library together with a USB-C protection IC to implement a DRP device. How should I handle a fault signalled by the protection IC? - How should I inform the USB-C PD stack about this event? - Is it sufficient to r...
Hello, I'm working on STM32G0B1KET6N uc with custom board.When I'm using this tutorial: https://wiki.st.com/stm32mcu/wiki/STM32StepByStep:Getting_started_with_USB-Power_Delivery_Sink everything is working great, my device is acting as USB PD Sink. Bu...
Hi,Am I allowed to call the USBPD_PE_Request_CtrlMessage(), USBPD_PE_Request_HardReset(), USBPD_CAD_PortEnable() and others from different threads?I want to request data role swap, power role swap and hard resets from my interface thread.Thanks!BR, C...
Hi,lately I realized that there are tracer errors from the USB-C stack in STM32CubeMonitor. I haven't seen them with older version of the USBPD libraries.Currently I'm using:- FW pack STM32Cube_FW_G0_V1.5.1- USBPD core library is now V4.0.0- USBPD de...
Hi All,Currently I try to compiler(clean and build) X-CUBE-CLASSB project for MCU self test function. I got error as below Does anyone know what wrong or missing setting something? I had try compiler in two project , all get error.IDE: IAR 9.20.4WI...
When generating code with CubeMX for an USBPD sink application for the STM32G0B1 when no RTOS is used within the function USBPD_DPM_Run on line 340 till 363 it enters an inifinite do while loop. This happens in the usbpd_dpm_core.c file.It is undesir...
I have a STM32G071B-DISCO Kit. This device have a two USB C port. One is plug type and receptacle type. I'd like know how to use spy mode between SRC and SINK. I did connect this to SRC device and SINK device and connect micro-b port to STM32CubeMoni...
Hi,I am trying to use the STM32CubeMonitor-UCPD app in combination with the STM32G071B-DISCO board to analyze traffic running over an USB-C power delivery line.In order to trace I need to open the "door".My problem is that once the door is open the b...