Hello,I trying to follow the steps provided in this video : https://www.youtube.com/watch?v=Z_Sn6CBbz-kFollowed each step, compiled, and successfully uploaded the firmware.I am able to see the COM port COM34 in my device manager as shown in attached ...
I have a STM32G071B-Disco and straight out of the box it has been able to work for me as a Spy/Sniffer. Also, with the blue switch closed, it works as a Sink that can attach to my Source I'm developing and I can see the traces.My Source supports sen...
I just bought a STM32G071B-DISCO because I was looking at using an ST32 in my USB-C application and I'd hoped this could be an analyzer and a starting point. However it constantly disconnects and loses contact with the board. No refreshing brings it...
Hello, I'm able to connect the STM32CubeMonitor-UCPD with NUCLEO-G071RB and X-NUCLEO-SNK1M after following the instructions in AN5418. I only changed port 0 Sink PDO1 to 0x020641F4.I want to use the setup as a sink and always want to get the maximum ...
Hi,lately I realized that there are tracer errors from the USB-C stack in STM32CubeMonitor. I haven't seen them with older version of the USBPD libraries.Currently I'm using:- FW pack STM32Cube_FW_G0_V1.5.1- USBPD core library is now V4.0.0- USBPD de...
I have a STM32G071B-DISCO Kit. This device have a two USB C port. One is plug type and receptacle type. I'd like know how to use spy mode between SRC and SINK. I did connect this to SRC device and SINK device and connect micro-b port to STM32CubeMoni...
Hi,I am trying to use the STM32CubeMonitor-UCPD app in combination with the STM32G071B-DISCO board to analyze traffic running over an USB-C power delivery line.In order to trace I need to open the "door".My problem is that once the door is open the b...
I am currently building a USB PD programmable power supply sink application (upto 100 W) using Nucleo STM32G0 and X-Nucleo-SNK1M1 boards. While using the STM Cubemonitor UCPD interface, I am always getting a "DEFAULT 5V" contract (attached screenshot...
The X-NUCLEO-LPM01A PowerShield has a dynamic current range maximum of only 50mA.This is a long way short of the maximum current found in many STM32 applications; eg.STM32WL - max Tx current is 120mA;B-L072Z-LRWAN1 - max Tx current of the radio modul...
Hi All, I followed the updated ST tutorial on Youtube for setting up USB-PD (https://www.youtube.com/watch?v=-vsJhNIaHxE) and I can't seem to actually get it to show up on the STM32CubeMonitor-UCPD app after following as closely as I could. I am desi...
