Hi,When I have a look at the AN5056(https://www.st.com/resource/en/application_note/dm00414677-integration-guide-for-the-xcubesbsfu-stm32cube-expansion-package-stmicroelectronics.pdf), there is a possibility on page 39 to improve the boot time. That ...
It looks like STM32L496xx.h does not have the hash peripheral definitions in it. e.g. The STM32Cube_FW_L4_V1.16.0 examples for STM32L496 HASH peripheral are all configured to use the STM32L4A6xx. Does ST have a plan to update STM32L496xx.h?, or Is...
Hi,in https://www.st.com/resource/en/programming_manual/cd00283419-stm32f10xxx-flash-memory-microcontrollers-stmicroelectronics.pdf section 2.4.1 it says that, for connectivity line devices (like the STM32F105RC I'm using), pages 0-1 are automaticall...
hi there I cannot figure out the true meaning of htcr reg and config1~config3 field in rng_cr reg。 I was wondering about the relationship between health test register and health test parameter (repetition counter test the “40�? consecutive bi...
HelloIn chapter 22.4.9 of RM0434 Rev6 is stated:Counter: a 32-bit big-endian integer that is incremented each time a blockprocessing is completed. The initial value of the counter must be set to 1.Why can be the initial value of the counter not be se...
My question is about intellectual property theft at CMs. Clearly ST recognizes the issue and even addresses it by adding SFI (secure internal firmware install) on some microcontrollers. AN5054 is listed in the resources for STM32L010K4; however, it i...
the HSM description in manual UM2238(Page 13)