When using the STM32CubeProgrammer 2.4.0 API to write the address 0x08080000 the API hangs (my program hangs). I tried the STM32CubeProgrammer software itself, if I choose the EEprom view (in the grid) and I modify any byte, when I validate modifica...
Sorry, posted the wrong device before. Corrected that.
Hello, I'm having some issues with an STM32L071RB. I'm unable to read from memory address 0x08020000 onwards because it's supposed to be read/write-protected. I had similar results on STM32CubeProgrammer and via the I2C bootloader, which are as follo...
Hi,I am experiencing a problem with STM32CubeProgrammer: it fails to program STM32L0s MCU when the size of the file to program is not a multiple of 8.In the attached zip file, there are 2 .bin files containing 16 bytes of zeros (working.bin), and 20 ...
Hi everybody,I use the STM32CubeProgrammer version 2.3.0Following issue occurs during programming of a hex-file:1.) do a mass-erase or a clear of all sectors of the device2.) read out some bytes (for example the first sector)3.) the device-memory tab...
I am using STM32L072RB microcontroller,new to stm32cubeprogrammer,does all interfaces (UART, USB DFU, I2C, SPI, and CAN bootloader interfaces) support debug and programming ?What hardware changes are required to implement programming features via th...
I tried to compile the example project STM32CubeProgrammer_2.2.0/api/project/Qt/STM32CubePrgAPI using mingw32, the project compiles perfectly but doesnt do anything at startup. When I compile it with mingw64 it works. STM32CubeProgrammer_2.4.0 does...
When using the command line version of STM32CubeProgrammer, I notice during the verification process (-v flag), the progress bar follows a sequence like 6%->12%->18%->24%-18%->24%... and ends at 24%, with a successful verification. Picture provided f...
Hello all,We are developing a product with a STM32L071x8 uC in it and we're using STM32CubeProgrammer to upload firmwares to it. We used to be able to upload firmwares with no issues. However, ever since we developed our newest firmware, we have be...
Hi,I am trying to call the bootloader from my application, on a STM32L072. I followed posts in ST Community and other resources, but failed to do it.I tried the code given in different places as below:void BootLoaderInit(void){void (*SysMemBootJump)(...