Hello everyone! I have been complaining about this for 1 week. I can't make "HAL_I2C_Slave_Seq_Transmit_IT" send data to the master, but Slave to master ACK works fine, does anyone have any advice to give me that can guide me a little? I am using the...
Hi,I am reviewing the Safety Manual to utilize the Self-Test Library provided by ST, and I have questions about the RAM Test method.It is mentioned that STL provides RAM Test using the March C-algorithm, and its verified diagnostic coverage can satis...
Hi team,We have selected Trust zone MCU STM32U585ZIT6Q (U5 series) for our project.We are using with Trust zone enable in our project with AZURE RTOS. 1: without Thread x STL Lib working . 2: with Thread x STL lib failed for CPU TM7 function . PSP ,...
Hi All,I have recently joined a new company and I currently responsible for the Firmware design on a new product that has been externally advised that it should be rated as Class C, with regards the following standards (IEC-60730 and IEC-60335). The ...
I have came across the Library package X-Cube-ClassB which certifies household electronics appliance Class B. I couldn't find anything for class C. Is ST working on developing a Class C library? If so, Can I get a roadmap? If not, can I get support f...
I've downloaded the x-cube_classb application, but none of the projects will build for EWARM In addition to a few warnings, the linker fails: unable to allocate space for sections/blocks with a total estimated minimum size of 0x220 bytes (max al...
hi! I am using spi code off reference manual because i need make a function for write register and read the register. but with Hal not work well. i am make other function name:but, this code not work, i copy of reference manual:i don´t know how put c...
hi， I use STM32_Safety_STL to test STM32L433RC RAM, but when configureRam, return "STL_ERROR",please help:code :#define RAM_SECTION_SIZE 128U //STL hard coded#ifdef STL_DISABLE_RAM_BCKUP_BUF#define RAM_BACKUP_BUFFER_SIZE 0#else#define RAM_BACKUP_BUFF...
I start the safety functional software by the example from "STM32CubeExpansion_STL_G0_V1.1.0". From the readme.txt, it mention "Install ST CRC tool", but it is "STM32CubeProgrammer", is this tool has built in CRC function? by post-build steps command...
Hello,I'm working to add the STL Library to my existing project, I'm trying to run the function StlSingleTest but it fails (STL_FAILS) executing the STL_SCH_RunFlashTM(&StlFlashStatus) section.micro: STM32F446ZETFlash:Bootloader: 0x08000000 - 0x0800F...