I need to transmit data over usb with minimum 1 Mb/s from device to host, I configured my mcu (stm32h732zg) as an audio device to get a large packet transfer.the function that transfer the data USBD_AUDIO_DataIn is empty. and USBD_CtlSendData i'm usi...
I need to transmit data over usb with minimum 1 Mb/s, I configured my mcu (stm32h732zg) as an audio device to get a large packet transfer.the function that transfer the data USBD_AUDIO_DataIn is empty. and USBD_CtlSendData i'm using cause the usb des...
Hello together,i'm using the X-CUDE-USB-AUDIO expansion pack with the Development Board STM32F769 Discovery Kit. We plan to integrate it later on into our product. The example project for playback and recording works fine. But we wonder which synchro...
Hello everyoneI am trying to implement a simple soundcard from using STM32F407G-DISC1 board.It utilizes STM32F407. I am using CubeIDE version 1.10.1I configured the USB to be Full-speed Device Only. And I configured the middleware as Audio class.I se...
Posted on March 31, 2016 at 16:00Dear all,I would like to know if the USB battery charging detector implemented in the STM32 line works properly with USB Type-C connectors that only use USB 2.0 lines.Thank you in advance. #compatibility #bcd #typ...
Hi every body, current we have a problem when make compatible between USB2.0 and type C on our devices.We don't want full type C's feature yet. We just wanted our firmware to be compatible with type C cable on some laptop which have only type C conne...
Hi all,I purchased the nucleo-stm32g474 board and the z-nucleo-USBPDM1. I would like to use the USB port to communicate with the computer at speed (HIGH SPEED). I am unable to find an example of how to do this and how to communicate with the microcon...
I am trying to implement a simple soundcard from using STM32F407G-DISC1 board.It utilizes STM32F407. I am using CubeIDE version 1.10.1I configured the USB to be Full-speed Device Only. And I configured the middleware as Audio class.I set the the heap...
