HelloI hope you are doing wellI read the TF-A documentation and I found out that there is a POC for TPM service that measures event logs during startup. Source: https://trustedfirmware-a.readthedocs.io/en/latest/design_documents/measured_boot_poc.htm...
i am using openstlinux starter package use in stm32mp135-dk. i want to know how to upload a video in sd card of board and also how to play in board.
Hi,I am new in STM32MP1 MPU Linux and wish to get the guiding to start developing Linux OS app for my board. The first question:I need to switch GPIO pins. Any suggestions where to start for single core MPU STM32MP135. Thanks.
Dear All, I have followed the instruction as per Intro to Embedded Linux Part 2 - Yocto Project.The compilation for layer kirkstone. When i run the command "bitbake core-image-minimal" it give error after 4 hours of work.The error is pasted below./ho...
Hello,we have developed a project in STM32CubeIDE which already works.the the project is generated "Under Root" like this: Now we want to implement the compilation in a yocto layer instead of use .elf directly.we have take into account the extended...
Hi ST experts,I'd like to build a bare metal ARM cortex-A7 driver for my MIPI DSI display module. Because there is no HAL driver for LTDC and DSI host then I decided to build it from scratch. I followed the procedures from the STM32MP RM document to ...
I am making a board using STM32mp151a.I want to make Linux OS for this machine.I refered to the web page below.https://wiki.st.com/stm32mpu/wiki/How_to_create_your_own_machineHowever, Error happened on bitbake process.Please tell me the cause and cou...
Hello,I'm trying to configure an externall interrupt (for a digital signal) to be handle from the User Space. I have configured the following node in the device tree on the root node:/ {... exti_gpio_node { compatible = "test,button"; ...
Hi,I am compiling a yocto custom layer, I am using this layerspoky/meta-poky \ poky/meta-yocto-bsp \ meta-openembedded/meta-oe \ meta-openembedded/meta-python \ meta-st-stm32mp \ custom-image \I was able to connect the LBEE5KL1DX Murata module to wif...
We are using STM32MP135-DK and we connect to SPI5 an SD Card Adapter.We modified the device tree as follows to use the mmc-spi-slot driver: &spi5{ pinctrl-names = "default", "sleep"; pinctrl-0 = <&spi5_pins_mx>; pinctrl-1 = <&spi5_sleep_pins...
