Dear community,I'm currently having a problem setting up an OPCUA client. Using the open62541 package, I was able to connect to an OPCUA server created in Node-Red. I was able to both read and write to the server's addresses. The connection was made ...
There seems to be an option to change assignment in STM32CubeIDE (in .ioc file), but DMA1 is assigned to A7 and DMA2 is assigned to M4 and the another core is always greyed out. Is it possible to unlock those settings?
Hello, I am working with STM32MP157C-DK2 board and trying to pass messages between the CM4 and the CPU (main processor) using the OpenAMP framework over the com ports ttyRPMSG0 and ttyRPMSG1. On the CPU I have the openstlinux-weston image, and a C pr...
Hello! I use STM32CubeIDE for STM32MP157A-DK1 board. I want to deploy the kernel directly from the development environment. To do this, I set up local and remote paths for the device tree and for the uImage file (see the screenshot). At first, I trie...
I'm working on project that is including ADC, timers and virtual UART. I'm working on STM32MP157C-DK2 board. So I started from example OpenAMP_FreeRTOS_echo from CubeMP1 software package v1.2.0. I'm using CubeIDE v1.4.0. When I reboot STM32MP1 and de...
Hi, I am using stm32F767zi controller board with STONE 15" display. We are having trouble receiving data from the LCD panel. When we try to receive registry entry (8 Bytes) the system works fine, but when we try to read the variable register, the rec...
Hi,Please tell me whether the virtual Uart take any hardware resoure (eg: actual UART port, PIN).Does the virtual Uart support the baudrate change? If it support, what maximum speed it can support?The virtual UART demo example in "STM32Cube_FW_MP1_V1...
The program can not be uploaded under the dunfell distribution via CUBEIDE 1.3.1 to the target system. Using the thud distribution, target uploads works.Are there any hidden upload scripts in the CUBEIDE - how to debug the debug upload?Which yocto pa...
Echo demo application works fine, but when launching ADC example it fails after transferring the elf.Windows host. DK2 board./Peter
I faced crashes when implementing IPCC on M4 (Hard Fault Crash) and A7 (Kernel Ooops or dead system). Observations on M4: - Once I 'solved' the issue by disabling Uart7- Once I 'solved' it by removing the FreeRTOS (which was configured with CubeMX de...