Dear all,I want to program my STM32F407 by UART.I can connect to the microcontroller correctly by uart. boot0 is high and boot1 is low.I can read the pre-programmed code by the uart.I can erase the microcontroller.But I cannot program my stm32f407. T...
I'm setting up toolchains and workflows and cannot get the CLI to read a non-zero deviceID.I've tried updating drivers to latest and firmware to V2J35M26. Same Issue.I've tried several different nucleo boards (of the F446 and F412 variety) and even a...
Earlier I had the IC without any error using STMCube Programmer. I had switched atolic true studio from 9.1 to 9.3 and compiled the code. I am able to program the board using Discovery kit SWD connection
I am running Windows 7 and v2.1.0 of the STM32CubeProgrammer. It is unable to find connected ST-Link devices (in this instance, an ST-Link/V2, a Nucleo STM32F411RE, and a Nucleo STM32F303RE).However, if I click the "Firmware Upgrade" button, it is a...
Hi I'm running the STM32CubeProgrammer on MacOs and I'm trying to connect a cheap STM32F407ZG to upload a program via USB the the programmer cannot connect to the board. Anyone got any ideas?
This week I am about to start production of my embedded product using STM32F411. I need a simple way to drag n drop firmware.ELF into a batch or exe that downloads and verifies. I am digging into the STM32CubeProgrammer documentation, but I have not ...
I'm using STM32F401RB, which has an internal 128KB flash. IAP bootloader is using about 20KB. So, I set USER_APP's flash address to 0x08006000 (24KB)When I download the USER_APP hex file with STLINK UTIL or STM32CubeProgrammer, they erase the flash f...
Before you say "Well act-chilly", no, the processor is not level 2 locked. Just level 1.Using STM32CubeProg 1.4.0 on MacOS or Windows 10, STM32F405, serial port.I am bootloading a bunch of processors using their serial ports.If I put the processors i...
Hi, I just populated a custom board with STM32F413RGT6 and tried putting FW on it via USB DFU. The Board is recognized as STM32 bootloader, Cube Programmer 1.4 detects a FW 0x011A Bootloader on the chip but complains that the device is not supported....