Hi,when I'm trying to read the content of the internal flash memory via internal UART DFU bootloader STM32CubeProgrammer 2.4.0 CLI reports the following fatal error: > .\bin\STM32_Programmer_CLI.exe -c port=COM3 br=57600 P=EVEN db=8 sb=1 -u 0x8000000...
Hi all, I have been looking for sometime now but I can not seem to find a link to a bug tracking system where I can report issues that I am facing with STM32CubeProgrammer or Micro-controller. The community has been helpful but it would be good to ha...
STM32CubeProgrammer not clearing the Option Bytes on STM32H7B3i-DK. I can not load any code.Is it possible to clear these bytes with STM32CubeProgrammer and if so how? Below is the error that I am getting.13:58:53 : Time elapsed during the read opera...
Hi,I am experiencing a problem with STM32CubeProgrammer: it fails to program STM32L0s MCU when the size of the file to program is not a multiple of 8.In the attached zip file, there are 2 .bin files containing 16 bytes of zeros (working.bin), and 20 ...
Hi,I recently stumbled on a issue.For a project we developed a bootloader which checks the programs CRC if it matches and halts if not. The CRC is calculated after linking and is placed in front of the application.I found out that there is a differen...
Hardware used:STM32H747I-DISC0 Discovery kit (MB1248-H747I-D02 / A191001982)Tools used:STM32CubeProgrammer v2.4.0.STM32CubeIDE v1.3.1 for code generation(gnu-tools-for-stm32.7-2018-q2-update_1.0.0.201904181610)STM32CubeProgrammer gives me an error wh...
I tried reinstalling the application. Java version is 8, Update 251.
It seems that H7A3ZI on Nucleo-H7A3ZI-Q is returning incorrect memory descriptor:@Internal Flash /0x08000000/256*02Kg,@Option Bytes /0x1FF8000/01*128 e,@OTP Memory /0x1FF7000/01*1024 eWhich tells there are only 256 of 2K (512KB); it should have...
Hello,Please move this to a more appropriate section if required, or let me know if there is a better way to report bugs.I have come across a couple of bugs whilst developing an STLDR for external flash access, note the memory arrangement of the flas...
When using the command line version of STM32CubeProgrammer, I notice during the verification process (-v flag), the progress bar follows a sequence like 6%->12%->18%->24%-18%->24%... and ends at 24%, with a successful verification. Picture provided f...
