Dear STM comunity, i am currently trying migrate my solution from the kirkstone to mickledore because it offers more software functions that i need and cant properly use on the kirkstone, i have spent alot of time trying to port the configurations f...
x linux-5.15-stm32mp-r2 for our puposes. I have also attached the pps-gpio source code in case it is useful.
HI There, I am getting error installing wireguard in STM32mp135s. I have added wireguard-tool by adding in local.conf, its successfully builts. but when I add wireguard-module I get compilation error. So I skipped it wireguard-module. Some kernel set...
Hi，allI noticed that the ethernet driver stm32mp13xx_hal_eth.c in the STM32CubeMP13_V1.1.0 already supports PTP, When will STM32CubeMP2 package be available, and since the STM32MP2 series supports TSN, whether EST(IEEE 802.1Qbv) and FPE(IEEE802.1Qbu)...
I am trying to update dunfell to kirkstone on stm32mp157f-dk2. I am observing below issue in systemd_create_users Configuration error - unknown item 'SYSLOG_SU_ENAB' (notify administrator) Configuration error - unknown item 'SYSLOG_GU_ENAB' (notify...
Hi , I am new to this boardI got this dialog box while starting the debug session as per start up guide.Board:STM32MP157D-DK1https://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157x-DK2/Develop_on_Arm%C2%AE_Cortex%C2%AE-M4/Modify...
How can I create a writable readonly rootfs using meta-readonly-rootfs-overlay layer? I am able to add this layer in yocto build for stm32mp135f-dk but its not working like overlay readonly. Is this possible to create a writable readonly rootfs? I kn...
On a proprietary board based on STM32MP157AAA, code was created on the M4 core for reading 11 analog gates managed in DMA (end of sequence interrupt) of ADC1 and ADC2 in independent mode with conversion start via software executed cyclically. The adc...
Hi Im using a STM32MP157-DK2 with a OpenSTlinux. I load my .elf file of for the M4 to /lib/firmware/ and starts it by chaning the state to start in remoteproc. The problem I have is that remoteproc seems to not run the code from the beginning of the ...
Hi ST experts,I'd like to build a bare metal ARM cortex-A7 driver for my MIPI DSI display module. Because there is no HAL driver for LTDC and DSI host then I decided to build it from scratch. I followed the procedures from the STM32MP RM document to ...
