I'm using the STM32 IDE, making a project for my Nucleo-G474RE. I've loaded the X-Cube AI software but when trying to analyze my model, it just refuses. I don't get any errors, it goes to about 16% then immediately to 100 and says anaylsis failed. I ...
HiI am new here using STM32WB55. I am writing drivers and API for GPIO and interrupt. But I'm facing some difficulty to find the pin for SYCFG to enable clock in APB2ENR. SYCFG is connected to the APB2 bus and when I use APB2ENR to enable SYCFG clock...
As shown in the picture, when I send the generate command, a compilation error occurs. The problem appears to be that std=c99 needs to be adjusted. Does anyone know how to fix this please?Thanks in advance.
Hello, everyone.I had a problem with version 7.2.0 of X-CUBE-AI.I load a keras 1D-CNN model and generate the code. I want transmit my inputdata to ai_input ,but the do-while() enter a endless loop. my code:ai_input = ai_network_inputs_get(network, ...
I'm trying to Implement basic MNIST Handwritten Digit recognition Model on STM32F769 DISC1 kit using STM Cube AI.Here are the steps I followed.Took a standard MNIST Digit recognition model from here https://colab.research.google.com/github/trekhleb/m...
Hi,I want to set up data logging from some of the sensors (accelerometer and ultrasonic microphone) of the STEVAL-STWINKT1B to the SD card using the FP-SNS-DATALOG1.However, I also want to add more externally connected sensors to the STM32 via SPI (i...
Hello,In the annex video it is mentioned that the project archive is available for the Nucleo board project with X-NUCLEO-IKA01A1, however when I download the materials archive it appears to be missing.Could you confirm this is the case, if so would ...
Hi Guys,first time poster here and kinda a noob in deployment of Models, so sorry if i forget to mention something.My Projekt:Currently i developed a ML model in python, which is working and takes as Input float numbers. Now i wanted to deploy it on ...
