Edge AI

I can't compile the AI project on the STM32H743 chip

How to deal with fatal error: ai_platform.h: No such file or directory? I can't find this file anywhere in the project.I tried using different versions of CubeIDE and X-CUBE-AI, added include paths in project properties. I checked on F7 and H7. I hav...

AI relocatable run-time API lets the MCU HardFault.

Hi,I'm testing running a relocatable binary model.But when I use ai_rel_network_run(), I get into HardFault.The detailed error information is as follows, with my current test code attached.Does anyone know how to fix this please?Thanks in advance./*...

I am trying to add UART1 function in FP_AI _SENSING1. Kindly let me know what is the procedure to add it.. When I tried it showing errors There are many errors like HAL_UART_RECEPTION_STANDARD undeclared

Resolved! Facing issues in configuring USART1 for debug messages on STM32H747I-DISCO board

Hello there!I am trying to edit the USB_WEBCAM example application provided under FP_AI_VISION1 package for STM32CubeAI on STM32H747I-DISCO development kit. I want to add debug logs using the STLink Virtual com port UART interface, which as per the u...

FP-AI Sensing in STEVAL-STLKT01V1 Enable UART printf is not working.

Hello, I am trying using FP-AI Sensing on STEVAL-STLKT01V1 sensortile board. I enabled UART as per the instruction by enabling SENSING1_USE_PRINTF in SENSING1_config.h and SENSING1_USE_PWR_MGNT to 0. I also did 10ms delay for initialization proces...

STMH743XI-E02 fails to validate NN model on target. LOAD ERROR: STM32 - no connected board(s), invalid firmware or the board should be re-started.

Hi, I am trying to deploy a Keras model that fits in the board STMH743XI-E02. In order to do so, I've created the model, and loaded it into the project according to the current documentation.I've tried to use several USART ports to enable communicati...