Posted on February 23, 2012 at 21:25 Hi there, I made some posts on the Keil forums but have been getting no answers there. Rather thanre-postingthem here I have included links. I would be reallygratefulif someone could give me any help or ad...
Posted on October 26, 2009 at 05:31Porting from ST10F269 to ST10F276, what about XRAM2 region?
Posted on February 18, 2012 at 11:50Hi all. Somebody tried to program st7fox? I tried to make, using ICC PROTOCOL REFERENCE MANUAL, but nothing has left. After an input ICC-Mode at st7fox answers syncro-bit and allows to write a code in RAM, but af...
Posted on August 12, 2008 at 10:22Cosmic Compiler bug
Posted on January 04, 2012 at 10:12I use ST7MC1K2B6 to control a BLDC motor with sensorless . when I boost voltage to 200V, MCU is reset. I don't use LVD and WDG, I just use a POR(Power On Reset,20k/10uF). I change the RC parameter, but improvement ...
Posted on January 03, 2012 at 21:20Hi, I can start EK302DL but I cannot run it under WIN7/64. Is it necessary to useit only within WIN XP ? I tried three different PCs with WIN7, every time EK302DLenters a endless loop. Parameters seem to be ok. ...
Posted on December 22, 2011 at 09:38I want the board as a router(ip_forward).In the linux system, I can use the kernel routing,However, the board of linux, I would not use this feature.Can you help me?thanks! #linux-route-arm-st
Posted on December 22, 2011 at 07:08I used the SSP sample code and enable SSP0 without loopback. I still get the transmitted dummy data when I send it for receving. After I test the sample code,I found that the GPIO setting cause this effect. I used...
Posted on December 20, 2011 at 13:05Hi, We are using the STR911FAWX6 Rev H device on one of our products that has been in manufacture now for around 2 years. We have shipped hundreds of these without a problem. However, on the latest build the CPUs...
Posted on December 03, 2011 at 07:59HiThis is ehsan, student of milan university, I am doing my final project in university which is relates to implementing Class c of IEC 60730. One of the routines which should be implemented, is RAM test routine v...