Dear Sir,I am using the RFAL driver and I would like to achieve reading multiple ISO15693 tags. How can I obtain the UID of multiple tags with RFAL driver? thank you very much in advance.Best regardsDai Sai
I am using X-NUCLEO NFC08A1 dev board & NUCLEO-L476RG base board with STM32 IDE. I want to detect NFC card on eval board but currently the card is not getting detected. can you please help to solve this issue.not able to receive data on serial port a...
Editing ST25R3911B DISCO in STM32CubeIDE did not generate an error, but it cannot be read. How can ST25R3911B edit NFC in STM32Cube?
Hello, I have a system working that is multiplexing one ST25R3916B to sixteen antennas using relays, but we'd like to replace the relays with something quieter. Looking at either using FETs or an RF switch. However, in order to select the right solut...
ST25R3911B-DISCO is not suitable for its GUI. Use the HAL library to write programs to read ST25. Is there a related program?
I have difficulties connecting two X-NUCLEO-NFC05A1. I had no problems reading different types of NFC cards but It is impossible for me to detect the other X-NUCLEO-NFC05A1. The board does not indicate that it detects any RF device.Is it possible to ...
Hello dear developers,I am currently working on NFC for the project for my graduation project. First of all, I would like to learn how X-NUCLEO-NFC06A1 works. Therefore, I tried to run the expansion board on the NUCLEO-F401RE and copied the files inc...
My project is to charge and receive data from a device that has on board energy storage (70F supercap). 300mW of received power is plenty for my application. I thought NFC WLC with iso15693 would be perfect for the job.From ST's NFC WLC webpage:https...
I have a strange problem on a new PCB design we are working on.We have developed two prototype PCB's, where the NFC works on the first one, but fails on the second:PCB prototype revision 1:The ST25R3918 NFC works fine. Based on Examples fr antenna de...
I have rfid and can working. I want to do is increase the cycle time for can so it is not too fast. Right now i am getting 0.3 cycle time and when i add the HAL_Delay(200) it increases the cycle time but the rfid slows down. Any suggestions what i ca...