The existing version of the ST25RU3993 Reader Suite (ST25RU3993_GUI_v1_8_6_EVAL) is not supporting the C Library files (from en.STSW-ST25RU-CLIB) that are currently available. Please inform by when the new version is releasing.
used STUHFL (ST25RU3993) to scan for RFID tags, and attempted to calculate reflect phase using real-time values of 'rssiLinI' and 'rssiLinQ' with the 'inventory' function, which was time-consuming.I utilized the CS demo of STUHFL to work with the ST2...
Dear sirIt is being developed on the ST25ru3993 board. The external PA is not working, so I checked the power and it is 0V. The documentation says it should be 4.1V, but I want to know if I can make it work again.Also, I want to know why the expansio...
I am looking to use ST25RU3993-HPEV kit for my project. Does the STM32L476RGT6 MCU (Which is included in kit), has ability to program with C language ? IOT? does the Antenna has ability to communicate with Arduino/ESP32 ? I2C/SPI?UART?
Hello,I'm working on a custom application with a board with a previous Firmware (V3.1.0) that works well. I have a 2nd board with the newest Firmware version(V3.2.1.0) that does not work with it. Any way to have access to a previous firmware V3.1.0.0...
How to simply use firmware for custom project? Which functions are necessary to scan tags? Example in gen2.h requires almost all files included in the project, which creates many errors when compiling. P.S. I have successfully read chip version, so w...
The ST25RU3993 is flagged as NRND and Digikey reports the part as EOL.The product is great. Is there a replacement planned?
About reading tags via USB UART by ST25RU3993 without ST25RU3993 Reader Suite GUI.To initial and start reading tags automatically after plugged in and print them on serial terminal (ex: Tera Term) via USB UART (not the UART LOG pin) by ST25RU3993 wit...
We are designing a board that uses the ST25RU3993 Reader. We will have a Raspberry Pi 2040 microcontroller on the board for communication. Do you have any firmware or code that can be used to communicate to the reader from this Microcontroller?
We are working with ST25RU3993 eval board and controlling it from linux based STUHFL C code base.Could you please suggest best config for reading weakest tags with ST25RU3993 using C code base.