Posted on November 24, 2013 at 18:19I use the CR95HF chip for reading and writing data in the NFC forumtag Type 2 Tag (NTAG203F). I can read the data, but can not write data to Tag, although NTAG203F is writable. When I send a command to write data,...
Posted on November 05, 2013 at 16:29Hello, I want to download the http://www.st.com/web/en/catalog/tools/FM147/SC1871/PF259363♯, the Excel sheet named STSW-95HF003. Can you fix the link, because it is broken, it gives a 404 Error. Or you can give a ...
Posted on October 18, 2013 at 11:58Hi to all,I'm using a self-made eval board based on the M24LR16E-R dual EEPROM chip. It is very simple as it consists of the EEPROM chip, filter capacitors, pull-up resistors and, obviously the antenna.RF signal is...
Posted on August 14, 2013 at 22:24Hello all, I have been trying the M24LR-discovery board. Without applying an external 3V3 supply to the board, the operational range appears to be only about 1.5cm (less than one inch). There is an antenna design ...
Posted on September 25, 2013 at 16:57occasionally when I send a CR95HFDll_SendReceive command, I get error code 4 back. 5 I understand - the USB is not connected, so I simply reconnect, but 4 is a communication error. How can I recover from this in...
Posted on September 24, 2013 at 19:36We were hoping we could download the PC sample source code for communicating with this board, but there isn't a download button on the relevant page:http://www.st.com/web/en/catalog/tools/PF259213Anyone got it, o...
Posted on September 04, 2013 at 11:55Hi there, I am using a CR95HF board from a M24LR discovery kit to read data from a device. If I use the dual-interface EEPROM software from the ST website, select Reader Application and select M24LR64A, then clic...
Posted on August 20, 2013 at 11:49 Hello, I'm using an RFID reader (Feig LRM1002) with 2 different version of the M24LRXX chip : - M24LR04E (ANT3-M24LR04E) - M24LR16E (ANT1-M24LR16E and ANT2-M24LR16E) A problem appear w...
Posted on July 30, 2013 at 16:09Hello I try to find out the difference between Reader Application M24LR04E and Reader Application M24LR16E when it comes to data reading. As far as I understood both components (M24LR04E and M24LR16E) operate with id...
Posted on April 19, 2013 at 16:10Do you have reference of coil antennas which we can used with the M24LRxxx? #antenna #ant3 #inductor