Posted on March 20, 2014 at 10:58Hi everybody!It's my first post here and it's my first time working with STMicroElectronics stuff so please be aware I will probably ask very simple or even stupid questions. Please have some patience with me! By the...
Posted on February 25, 2014 at 21:26 Update: It looks like you do have to send the write password with the verify command before calling the enable or disable verification commands when modifying either the read or write permissions. You can then ...
Posted on February 17, 2014 at 09:54hi , 1.what is the page size in M24SR-16 ? in the datasheet its declared that write time for page in I2C = 5ms , write time for up to 264 bytes =150ms 2.Is it normal after writing 5 bytes to the M24SR , i a...
Posted on March 03, 2014 at 16:12Dear everybodyI have read about ''Using the same antenna for M24LRXXE-R and M24SRXX-Y'' in document AN4409. It describes in table 2.''Tuning parameters for M24LRXXE-R and M24SRXX-R'', that the tuning frequency of an ...
Posted on February 09, 2014 at 09:26hi , i having a problem with the deselect command , when i want to open and close Session on the I2C interface , the S(DES) command doesnt close the session (by looking at the GPO) , only by turning ON/OFF the VC...
Posted on February 04, 2014 at 16:16hi , 1.i have been playing with M24SR16-Y for few days , just want to inform that there is a mistake in table 67 . the Payload written in table 67 : 00 A4 00 07 02 D2 76 00 00 85 01 01 should Be ...
Posted on February 04, 2014 at 16:21hi ,What is the main difference between ReadBinary() to ExtendedReadBinary() ?for what i understand is that ExtendedReadBinary() ignore Message length (but still reside in the Memory address).is this the only...