Others: hardware and software

M48T86PC1�?�代替�?�?��?�れ？

I am looking for MTTF or FIT rate for M24C02-A125, part number M24C02-DRMF3TG/K (package WFDFPN8). Thank you!

I am using to st visual studio v.4.3.12, this error occurs when building. #error cpstm8 C:\Program Files (x86)\COSMIC\FSE_Compilers\CXSTM8\HSTM8\mods0.h:1 FlexLM Feature has expired. How can i fix this?

how to access CTRL registers in ST10F276 microcontroller?

Hi thereI want to do a write operation on ST10 flash. I'm using a example code from its datasheet. here is the code: FCR0H|= 0x1080; /*Set DWPG, SMOD*/   FARL = 0x0000; /*Load Add in FARL*/   FARH = 0x0000; /*Load Add in FARH*/   FDR0L = 0x0000; ...

Refer: .lib Thyristor_SCR_Sxx65x_Sxx70x_A_SPICE_Model.lib, I created symbol for S6070W. When I simulate, I measure I_GT 45mA, for V source of 500V DC and load of 100 ohm, SCR is not turning ON. Only 3.5mA current is flowing through SCR.

Alternate part number for M24C02-WDW6TP

Hi everyone,We have designed our custom boards using M24C02-WDW6TP from STM Electronics.As this part is now out of stock and not recommended for new designs, M24C02-DRDW8TP/K part number can be used as alternate ?

Hi STM Team, We are planning to use STUSB4500 in our next project. We would like to have 15V@3A in PDO2 and 20V@5A in PDO3. Can we get factory programmed versions of this chip for such custom PDO configurations. Best Regards, Vyshnav Krishnan

As per datasheet it should be possible to set this configuration. Please correct me if am wrong.

�?T1635H-6G】RoHS Compliance

Hello Community， We recently purchased T1635H-6G, and now we are having a hard time determining whether the part is RoHS compliant or not. A distributor tells us that the "G suffix" on the chip surface proves the RoHS compliance, however, and they ar...