Recently for a design I had used STM32 MPU (part# "STM32MP157FAA1") with DDR3L (part# "NT5CC256M16ER-EK"). For simulating data & address lines from the IBIS model "ibis5_4gbddr3_e_1p35_0c~95c.ibs" in ANSYS for 500MHz frequency the source transmitter ...
Same or related postshttps://community.st.com/t5/stm32-mpus-products/op-tee-error-on-new-v5-0-0-sdk/td-p/578239/page/2https://community.st.com/t5/stm32-mpus-products/op-tee-error-tzc-permission-failure-on-new-v5-0-0-sdk/m-p/584339Custom STM32MP157AAA...
Hello, I'm currently working with a STM32MP157D-DK1 Development Board with 4GB DDR3L. I populated the board with a prebuild openstlinux 6.1 build like discribed in a guide in the ST wiki.When checking the total memory i unfortunatly only get 407MB th...
Hello ST community,I am designing a board with STM32MP135 CPU and DDR3L based from STM32MP135F-DK.DDR stress test passed successfully and tf-a files are adjusted to have I2C4 on pins used in my design (SCL on PB13 and SDA on PB7).When I flash board t...
Hi,I'm having some difficulty routing 1GB DDR3L memory with the STM32MP151DAC1. Both reference boards available for this product use different memory or pitch configurations. I found an Application Note, AN5122, that guides through memory routing, bu...
Hi, Can we use a DDR3L from Winbond with part number W634GU6NB-11 (Speed bin 1866) with STMPU STM32MP1ADD3. As STM32MP1 datasheet suggest that it can support up-to 1066. So using above part from Winbond will have any interface issue ? Thanks. H...