Hello,I'm use ST25R95. I'm facing problem with Tag detection in WEF mode.Its working fine with WEF from Time out and IRQ_In low pulse, But not get wake from sleep modewhen I configured it for a Tag detection.Observation: I seen during Tag Calibration...
Hello everybody, We hope you are doing well.we planned to use ST25R95 chip to create a smart card reader that can communicate with all smart cards and java cards (MIFARE and NFC). we read in ST25R95 datasheet that this chip does not support write act...
Hello, according to my sketchy investigation, passive NFC tags are not required to do FCC, CE certification, because they have no battery and are activated by radio waves emitted by the reader.This conclusion was drawn by unofficial contents. ...
Hello Everyone,I'm developing a WPF(.NET Framework) application in which i'm using the CR95HF.dll also I'm using the CR95HF Demo Board to read some ICs like M24LRxxE and ST25DVxxKI've made some readings using VB.NET since all the information I found ...
Hi we are developing a product in lighting with STM32MCU and ST25 NFC Chip.We are planning to develop an customer app for our products with certain parameters that we can have the variables through NFC .One of my colleague recommended the app can be ...
Hello all,I am using the M24LR Discovery kit which has an RF transceiver board with a CR95HF transceiver IC controlled by an STM32 MCU and a wireless tag, containing the M24LR04E-R EEPROM with an RF interface, controlled by an STM8 MCU. There is a de...
Hi! I have a problem with reading data from M24LR16E. First time i used Android ST25 app. Then, i tried to write some default data ("This is a text of 64 characters ====...") on NDEF tab, and after the connection lost (Start screen "Please tap an ...
Hi,I have M24LR16E-R product. I am reading UID and I see the IC ref product version 4Ch I was reading the IC ref value as 4Eh in the old versions I have. Looking at the ST documentation, I noticed that the value should be 4Eh. So is there any differe...
Hi there,My PhD project focuses on RFID-based wireless capacitive sensors.The Tag is M24LR04E, and I'm using a reader from the M24LR-Discovery kit with a CR95HF transceiver board and a 2 turn 424nH antenna.Current read range is 45 millimetres. My app...
Posted on November 05, 2015 at 08:39I only need to get the UID of a iClass card. According to the IS15693 specification, it is MANDATORY for the card to respond to the INVENTORY command. After the card is detected, I set the chip to this protocol f...