I have questions about the dimensions of this component: 1. The gap between pins can be questionable. Referring to page11, Gap = E-L1-L2. If I use nominal value, gap is 1.35-0.45-0.75mm = 0.15mm only. If I use the maximum value, gap is 1.4-0.55-0.85...
Hi,the SPWF04SA is labeled as "NRND" in its product web page. Is there any replacement for it in the roadmap?.In particular, I am interested in WiFi modules supporting Micropython onboard.ThanksRegards
We are planning to use RHFLVDS2281K01V LVDS buffer for our Space Project. In RHFLVDS2281K01V LVDS buffer,it is written RHFLVDS2281K01V is qualified for Aerospace but we want to know is RHFLVDS2281K01V also qualified for Space Applications? That is do...
I have troubles using sleep mode with this MCU.In our application there is a hardware watchdog (STM6822), which should be restarted every 1 second.I use RTC alarm feature for periodic wake-up.The problem is that the MCU sometimes freezes and the watc...
Hallo allI have troubles using sleep mode with this MCU.In our application there is a hardware watchdog (STM6822), which should be restarted every 1 second.I use RTC alarm feature for periodic wake-up.The problem is that the MCU sometimes freezes and...
Posted on May 28, 2015 at 19:56Hello All,I'm new here in the forum and I hope this is the right section.I would like to understand if it is possible to design the NFC antenna of the CR95HF with a separate PCB.I mean, the CR95HF is on the mother boar...
Posted on July 09, 2018 at 15:44I have a ECM from my Cherokee 1998 and the injectors are driven by a chip called W990L9748. I need a datasheet for that, i think that i have one twisted channel on that.
Posted on March 16, 2016 at 10:20Hello ,As per my project requirement, i need to design USB OTG which meets the ESD standard IEC 61000-4-2 level 4) and EMI standard CISPR-11. In ST website i found two categories:1. Common mode filter with ESD protec...
Posted on June 19, 2018 at 16:51Hello,I'm interested in developing an application involving the high side switch VN7003ALH. In particular I was interested in putting more of these switches in parallel in order to split the current load. In order to ...