STM32 MPUs Software development tools

Even though I uploaded a new device tree using stm32cudeide, there was no effect on my pins.

I am generating device tree and compiled it by stm32cudeide and upload to my board. So, baiscally I am following this link:https://wiki.st.com/stm32mpu/wiki/How_to_manage_OpenSTLinux_projects_in_STM32CubeIDEMy issue is that no matter what I do, nothi...

Resolved! STM32MP157A, enable USART2 through ST-LINK

Hi, I have a STM32MP157A-EV1 board. I'm running it in the engineering boot mode and programming the Cortex-M4 directly through the STM32CubeIDE. At the moment, I do not use the Cortex-A7. I would like to enable USART2 and use it through the ST-LI...

Resolved! STM32CubeProgrammer - Segmentation fault (SIGSEGV) when trying to connect to a STM32MP157F-DK2 via SWD/JTAG

When I try to connect to a STM32MP157F-DK2 board via SWD/JTAG, STM32CubeProgrammer aborts with a segmentation fault on my host system (openSUSE Leap 15.2).I get the following error message, when I start STM32CubeProgrammer within a shell:# # A fatal ...

Resolved! EXTI configuration in STM32CubeMx for STM32MP157F-DK2

I am having difficulties activating the EXTI interrupt for a pin in the M4 NVIC. What I did: Opened STM32CubeMX,selected the board STM32MP157F-DK2,opted to configure all peripherals in their default stateActivate SPI5 in the M4 domain, incl. DMA do...

Resolved! Does stm32cubemx not support generate project with makefile?

I try to use STM32CubeMX generate project with makefile, but the option is gray. It's can not select. Does the cubemx not support generate makefile on stm32mp1 platform ?

STM32CubeIDE Serial Console in use

I am stuck at step 6 inhttps://wiki.st.com/stm32mpu/wiki/Getting_started/STM32MP1_boards/STM32MP157C-DK2/Develop_on_Arm%C2%AE_Cortex%C2%AE-M4/Modify,_rebuild_and_reload_a_firmwareMPU Serial Console is operational, ethernet RJ45 also, and serial port ...

Resolved! Unable to find STM32MP157D-DK1 board definition

Hi there! I just purchased an STM32MP157D-DK1 discovery board, and noticed that in STM32CubeIDE there are no definition files for this model, only a subset of the other MP1 discovery boards (but curiously not all of them). Is this product unsuppo...

Resolved! Cannot recognize device when connected to STM32cubeprogrammer

I have set up the device, 5V 3A wall PSU and connected to the USB stlink connection. Connecting to the onboard stlink I can recognize the board serial number but the programmer fails to recognize the device. What am I missing? The device works perfec...

Good afternoon. Using CubeMX, I created an empty project for the STM32MP157A-DK1 board. It compiles without errors. But when I try to start debugging in engineering mode, I get a message that there are too many breakpoints. When I try to start debugging i

Good afternoon. Using CubeMX, I created an empty project for the STM32MP157A-DK1 board. It compiles without errors. But when I try to start debugging in engineering mode, I get a message that there are too many breakpoints. When I try to start debugg...

How to configure SDMMC Pin in STMCubeMx to make Board contain two SDMMC partitions both used for boot ?

Hello everyone, I'm configuring my STM32MP157C-DK2 Board pins and i want to make two SD Card partitions availabe. For the first one i chose the SDMMC1 and attributed it to PC10 pin for the second one do i need to choose SDMMC2 and to attribute it to ...