hii am using stm32mp157d-dk1 and i have downloaded qt creator and i have created a simple hello world window now how to display it in the stm32mp157d-dk1? how to set up cross compilation in order to deploy Qt projects directly from a host Linux machi...
Using the latest CubeMX 6.9.0 on Ubuntu 23.04 The following has happened quite a few times in the past years , also on previous Linux and CubeMX versions. Now would like to raise this issue as it's becoming very annoying now doing more work in Cu...
HiI try to play a video on 1080 P , and my stm32mp157f-dk2 board are connecting through the HDMI , and whenever i play the video, video getting so many lags but sound is good,please let me know.i am using the same players With GPUGstreamer graph: pl...
Hi,I'm currently facing an issue while trying to flash my STM32MP157C using STM32CubeProgrammer (CLI) with a flash layout `.tsv` file. Every time I run the command, it seems to flash partition `0x01` successfully, but then it starts flashing the same...
As the title says, I'm working with ecosystem 5 on a custom board with bootchain DTB files generated by CubeMX and modified according to lab material for the STM32MP1 workshop presentation "Lab-MP15_FromPartNumber_To_BasicDeviceTree_with_CubeMx.pdf"....
I’m working on a project with the STM32MP157F-DK2 Discovery kit, I’m exploring the possibility of integrating GSM for internet access.Has anyone successfully implemented GSM connectivity on the STM32MP157F-DK2? If so, could you share your experience,...
Hello,we want to implement Non-blocking method like in https://wiki.st.com/stm32mpu/wiki/How_to_start_the_coprocessor_from_the_bootloaderOur efforts searching documentation and reading discussions in the forum hadn´t resolve the situation.We are usi...
I'm on Linux debugging STM32MP1, latest version of everything installed. I used to be able to debug in "production mode" but now I got:"The serial device 'MPU Serial (/dev/ttyUSB0)' is not available."if I start debug"The selected serial device 'MPU S...
Custom MP157AAA3 board. SD card formatted with ECO 5.0.0 using the SD tools using the files from the starter package. (including rootfs etc..) . Build the TF-A, OP-TEE (in SYSRAM), U-boot and kernel from the ECO 5.0.0 sources.Kernel generates the m...
Hi all.I'm working through the lab material for the STM32MP1 workshop and have run into a snag after following the "extra hands on" presentation "Lab-MP15_FromPartNumber_To_BasicDeviceTree_with_CubeMx.pdf". My high level goal is to get binaries (TF-A...