Hello, I am trying to create a new STM32 baremetal project for STM32MP131Axx. Errors occurred when to build the project that ADC2 is enabled by using STM32CubeMX.'ADC1' undeclared (first use in this function); did you mean 'ADC2'? stm32mp13xx_hal_adc...
Hello, I create new STM32 project for STM32MP131AAG3 with baremetal. I encounter the following errors when to build the codes of DMA generated by STM32CubeMX.undefined reference to `HAL_NVIC_SetPriority'undefined reference to `HAL_NVIC_EnableIRQ'stat...
I have STM32CubeMX Version 6.10, STM32CubeIDE Version: 1.14.1with installed BSP STM32Cube_FW_MP13_V1.0.0When I create new bare project starting from evalboard STM32MP135F-DK as bare metal projectthen select NETXDUO, THREADX in Middleware and Software...
We're using the ST v5.0 eco-system and v.6.9 of STM32CubeMX.Per RNG internal peripheral - stm32mpu, the RNG1 peripheral should be a single choice assignment. When I click on A7S (OP-TEE), the tool warns me that it cannot be removed from the A7S conte...
Hi,we are generating STM32MP1 Code with CubeMX under Windows and add the needed lib file as references.That creates a link for each library in the CM4/.project file. <link> <name>Drivers/STM32MP1xx_HAL_Driver/stm32mp1xx_hal.c</name> <type>1</...
We are using the STM32MP157AABx device in our project and updating to the v5.0 Ecosystem and STM32CubeMX v6.9.0.When we generate our device tree files, the optee-os device tree tries to include:#include "stm32mp15xxab-pinctrl.dtsi"This file is not fo...
Hi, I have a STM32MP157A-EV1 board. I'm running it in the engineering boot mode and programming the Cortex-M4 directly through the STM32CubeIDE. At the moment, I do not use the Cortex-A7. I would like to enable USART2 and use it through the ST-LI...
