Hey Guys,I am trying to use the NFC Tap app to transfer data to an ST25DV device I have here, using the FTM mailbox feature.Mailbox is enabled. I get an error message from the App saying the send had failed.General question: When the App sends over t...
Posted on November 05, 2015 at 08:39I only need to get the UID of a iClass card. According to the IS15693 specification, it is MANDATORY for the card to respond to the INVENTORY command. After the card is detected, I set the chip to this protocol f...
Dear Sir,When I read the document of X-NUCLEO-NFC06A1, I found that the IRQ pin is not connected to CN5. I wonder the demo sample provided inST25NFC_Embedded_Lib_ST25R3916_1.4.0\Projects\STM32L476RG-Nucleo\Applications\X-NUCLEO-NFC06A1 do not use ...
Dear Sir,In order to check the RFAL functions with sample project in ST25NFC_Embedded_Lib_ST25R3916_1.4.0\Projects\STM32L476RG-Nucleo\Applications,I bought a X-NUCLEO-NFC06A1. I have a STM32F401RE nucleo board already, I wonderif the two board can b...
Hello, I am implementing Card Emulation function with CR95HF Chip. There is no description of the card emulator function in the datasheet, so I'm not sure if it can be used or not.If possible, can you provide the material in code form?It is implemen...
I would like to be able to read the memory content from a mifare and/or Felica tag similar to how the NXP tag detector app on Android does. How would I go about doing that?I have implemented the demo polling example using nfc03a1 and a non st chip ov...
I am using ST25DV04K Tags, sometimes the NDEF Message gets corrupted.So i can't rewrite an NDEF Message because the tag is not formatted anymore, in Android is no problem, the writendef function reformat the tag, but in ios it's not the case. Is ther...
HiI'm using ST25DV64KC, my I2C host is STM32G474There are two problem, need support. Please see detail. Thank you!1. I would like GPO generates a pulse when i2c write EEPROM(user memory)but it doesn't work, the GPO always output LowI have confirmed,...
Hi,We are using NFC tag IC ST25DV04K using I2C communication with our micro-controller.Is there any way to detect, if the NFC antenna is connected or not to ST25DV04K using any I2C command?Thank you in advance,Jignesh Patel
Is it possible to use X-NUCLEO-NFC06A1 with a microchip processor and how would I go about doing so? I have configured all of the pins on the microchip processor but can't seem to find any documentation on how to communicate with the NFC06A1 besides ...