I have an LM235 temperature sensor separated from the measuring device 5 meters.When an RF is induced to the LM235, it measures wrong temperatures. I have tried to minimize the problem by putting capacitors on the sensor pins but I have not obtained ...
I need to reball a FLI32626H that is clearly presenting soldering issues. One can see the chip is tilted with the naked eye. It has been reflowed twice to no avail.According to ST support, this is a legacy product, and ST no longer has technical reso...
I'm using STM32L4A6VGx , MT25QL256 NOR Flash connected with SPI. I'm trying to read the ID but didn't get any response except 0. Here is the code I wrote: // Select Pin HAL_GPIO_WritePin(Select_GPIO_Port, Select_Pin, GPIO_PIN_SET); HAL_Delay(10); HAL...
We are planning to use the SCLT3-8BQ7, but do not want to connect any LEDs to LDi outputs of the chip. The datasheet does not mention how to connect these pins in this case.Can you please tell us if we should leave these pins floating?NOTE: This ques...
Hi ST,We are implementing an M24C02-DRMF3 EEPROM based design and wanted to confirm the correct package marking for this device including part number, die version, date code and fab facility. Although the Data Sheet includes the WFDFPN8 mechanical in...
Hi, I'm looking for what I think is a Mosfet with this print, see the attached picture.I need to replace it because it's burned, but I don't know the features.Anyone can help me about ?Thanks a lotIvano
I used to choose a 10K resistor.But something seems to been wrong. Can anybody help with this? please!
I am interested in using this part due to it's radiation tolerances. However, the datasheet posted online only explains the radiation and package specifics. There isn't anything describing the pin out and function of the part. Can someone forward ...
