When installing some StellarStudio plugins http://*.srxstudio.org , you can meet the issue : sun.security.validator.ValidatorException: PKIX path building failed It is typical IT Issue :face_screaming_in_fear: in each corporate company. “"Path bui...
Dear all, We are thrilled to announce that as of today, March 1st, 2024, SR5E1 device support in StellarStudio is available to the mass market ! This means that any user can effortlessly download the official StellarStudio installation packag...
In the schematic of the ethernet configuration it is indicated that 3 components are not assembled: R28, R33 and R120. My question is, should I solder them for it to work?
when i searched datasheet about MPC5646, i found a datasheet of SPC56ECxx, this two mcu have same hardware pin, could they be used as substitution of each other?
I am writing a Flexray driver for SPC56. And I follow steps that mentioned in document. But there is not detail description in that document : SPC56XL70xx 32-bit MCU family built on the embedded Power Architecture® (st.com) . Like protocol initializ...
Hello everyone,I'm struggling trying to compile an old project without having to regenerate the configuration files, this project was made under the ppc freegcc with vle support V4.9.2 ,I tried to compile using the last actual version(4.9.4) and I'm...
Could the BAF_BYPASS field in the BAF configuration DCF register by modified by the user.If yes, under which module can I find it? I'm unable to find this in Lauterbach debugger.If no, how can I skip the BAF section during the bootup? - My device has...
Could you send us the datasheet of L9966, we want to know the difference of L9966 and L9966CB. Is L9966 EOL?
Dear All ,SPC5Studio Update sites are backin case of critical requests :contact us on credentials@spc5studio.com
Using SPC5 Studio 6.0-Clarke Error: Pin PIN_TCK: cannot find FunctionRef MSCR_512_0Error: PIN_TCK: Cannot find FunctionRef for MSCR_512_0Error: Pin PIN_TDI: cannot find FunctionRef MSCR_512_0Error: PIN_TDI: Cannot find FunctionRef for MSCR_512_0Error...