Hello, on SPC58xNxx board, I've been trying to generate PWM signals using Timer Output Module (TOM) and I followed this guideline:AN5552: https://www.st.com/resource/en/application_note/dm00730101-generate-pwm-signals-with-gtm-stmicroelectronics.pdf ...
Hi,I always take an error "EEPROM_ERROR_FLASH_PROGRAM" while I was trying to write some data on EEPROM.So, I debugged and realized It returned an error in verify stage.I give uint32 WriteBuffer[100] and It makes 400 bytes.In verify stage EEPROM drive...
HiI have a serious problem with EEPROM emulationWriting and reading commands from EEPROM work well at first glance.When I read the ST documentation related to EEPROM "UM0558", I noticed one thing and that is "swaping". Swap should be done when block ...
I have data which i need to store in eeprom,but i am facing following issue:The data once written to one block of flash, not able to overwrite the dataThe other blocks not able to use during run time
Posted on November 05, 2016 at 13:31Hello.I have an M95320 EEPROM and I have connected it to an Infineon microcontroller XC2331D. Enclosed you can find the circuit diagram for the EEPROM.I have tried to communicate with the EEPROM through SPI ports ...