Hello All, We have designed our own custom PCB using SPC582Bxxx, and we have assembled the controller and other circuit board. Now we would like to flash the our sample into custom device and test the same. For flashing the code we followed the UDEST...
Hi ,We have an AEK-MCU-C4ML1T1 Discovery board. We want to simulate AI road state monitoring with AEK-CON-SENSOR1+MEMS SENSOR BOARD and AEK-LCD-DT028V1. Where do we get the complete firmware to build an application with all the features as shown in t...
Hello! I want to ask in this routine! I read it This application shows how to the use the WKUP driver. In particular, the WKPUis configured to wake up the core and generate an interrupt on a falling-edgeof the source INT28. This source is connected t...
Hi Guys, We want to build a complete hardware setup with a SPC58EC-DISP board, AEKPOW-100W4V1, and AEK-USB-TYPEC1 and want to show USB-PD functionality with fixed and programmable output. 1. The first issue we face is AEK-USB-TYPEC1 giving only defau...
"Hi,We are building hardware with the SPC58EG80E5 MCU. For debugging purposes, we plan to use the UDESTK-EVAL kit. However, on the product page, it states that it is "not recommended for new designs." What alternative options can we consider?"
Hi,we want to know about AEK-AUD-CD-C1D9031. and Software, Flash tool, Debug tool. required for the AEK-AUD-CD-C1D9031.As of now, for our present projects we are using 1) Cross Core Embedded Studio Development Environment (2.9.0) and 2) IAR Embedded ...
My application is Neural Network based and I have SPC5 series microcontroller with me.I want some guidance whether I can use SPC5 series microcontroller for Neural Network.
The examples are a great resource to get started. But it looks like when making changes to an example it does not only safe in the working folder. It also safes (or changes) the original. After playing a lot with one example I wanted to just delete i...
We have a BMS board with SPC574S64 Controller and L9963E as BMS ICI am trying to communicate with the BMS IC via Direct/Normal SPI modeI have done the necessary HW connections properly and ensured the SPI lines are proper.I am trying to communicate w...
We have a BMS board with SPC574S64 Controller and L9963E as BMS ICI am trying to communicate with the BMS IC via Direct/Normal SPI modeI have done the necessary HW connections properly and ensured the SPI lines are proper.Now I have a question:1. the...
