After been testing VL53L3CX in my own board based in a STM32F407 micro, I want to test VL53L1CB now. But I am not wiring (satellite board) to a Nucleo board. I have connected it to my own board and trying to reformulate the project with STM32CubeMX. ...
I purchased P-NUCLEO-53L5A1 including X-NUCLEO-53L5A1 and NUCLEO-F401RE.And I assembled them and connect to PC, and then I installed its driver and reboot windows 10.When connecting, the explorer open the mass storage drive (D: (F401RE)).However, VL5...
I'm trying to adapt the example code available on st.com for VL6180_SimpleRanging (STM32CubeExpansion_6180A1_V1.0.0 for STM32F401RE-Nucleo) so that the Bottom sensor is used, rather than the one soldered directly on the 6180XA1 expansion board (V2).M...
Hello, I'm currently trying to run the VL53L0X sensor on the STM32f407VG Discovery development board. I am able to measure distance with a ready-made library I found on the internet. But these measurements are very noisy, and I get an error value of ...