STM32G431: ADC1 channel sequence confusion Heyho,I’m confused - or the STM32G431KBU (in QFN32) is…I’m using ADC 1 with 2 external inputs, PA0, PA1, and the internal “REFI” and temperature channel “TEMP”.All running with continuous and circular DMA in the background, no interrupts. If I need an ADC value, I simply grab it from the ADC DMA buffer.This is basically working, except for the channel sequence. Which I set manually, but have at least triple-checked the SQR1 / SQR2 values with the RM... If I set up the channel sequence in ADC1->SQR1 in the order: PA0, PA1, REFI, TEMP, then I find in the DMA buffer instead of this order: 0, PA0, REFI, TEMP→ so PA0 was “shifted”, PA1 is nowhere to be found (it is not 0, checked the GPIO via scope). If I add and insert a dummy channel “VDMY” as the first in the sequence, so that the sequence should result in VDMY, PA0, PA1, REFI, TEMP, I find this order in the DMA buffer:PA1, VDMY, PA0, REFI, TEMPAt least I get all the channels now, the measurement data is correct. So, what am I messing
