Wrong pin definition in datasheet of STM32WB5MM

[uouox]

In datasheet, pin 43 as PB0 and pin 44 as PB1. However, it is reversed on the module.

[Ghofrane GSOURI]

Hello @uouox​ 

Thank you for your contributions and for your detailed explanations,

I confirm the issue on my side, it has been reported to STM32CubeMX development team .

Internal ticket number: 141697 (This is an internal tracking number and is not accessible or usable by customers).

I will keep you posted with updates.

Regards,

Ghofrane

[KDJEM.1 · Accepted solution]

Hello @uouox​ ,

After check internally with @Ghofrane GSOURI , I confirm there is not issue in STM32CubeMx.

However,  STM32WB5MMG pin/ball definition table in the datasheet will be updated with

• 44->PB0
• 43->PB1

When your question is answered, please close this topic by choosing Select as Best. This will help other users find that answer faster.

Thank you.

Kaouthar