User Activity

When I try to boot from NOR flash, it always crash.The console has the log like this. INFO:  PMIC version = 0x21INFO:  Reset reason (0x15):INFO:   Power-on Reset (rst_por)INFO:  FCONF: Reading TB_FW firmware configuration file from: 0x2ffe2000INFO:  ...
Trying to load TF-A and uboot into NOR flash, but I always get this error.SF: Detected w25q256 with page size 256 Bytes, erase size 64 KiB, total 32 MiBmtdids=nor0=nor0 & mtdparts=mtdparts=nor0:256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env),-(nor_...
In datasheet, pin 43 as PB0 and pin 44 as PB1. However, it is reversed on the module.
I have a customized STM32MP157AAD board with STPMIC1E PMIC.STPMIC1E is pre-programmed to have same NVM as 1A version.After power up, the board can download firmware by CubeMX and run uboot from SD card, even partially boot the linux kernel.However, t...
Hi I built the linux kernel by following the steps on the stm32mpu wiki web. All default configuration except enabled earlyprintk. However, when I restart the system, it does not work any more.This is the error in boot log....[  0.349451] pps_core: L...