Others: hardware and software

Regarding S1 type s19 file

hi, every one I observed that in S1 type s19 file, the content is started with adress 8080, and in the end, there is 8000 adress, why they are given like that, there is any specific reason, can i make it in order by making change in settings in my I...

I am curious about the STM8L052C6T6 EEPROM operation.

I am using STM8L052C6T6.Current MCU knows that EEPROM is 256Bytes (0x1000 ~ 0x10FF).What happens if you use more than 0x10FF to put data in the reserved area address?If you do so, will the value of 0x1100 be put in 0x1000?And what happens if the MCU'...

Where can I find reliability data about endurance and data retention test for M24128-BFDW6TP?

sourceforge.net

Dear SDCC users,On the 30th of January SDCC 4.0.0 has been released.As always it has been put online in the SourceForge File section.https://sourceforge.net/projects/sdcc/files/There have been various improvements, both features and bug fixes sinceSD...

Hello all, I am looking to download firmware version 180621 or above for WiFi module SPWF01SA.11. Can you help me with download link or location of repository? Thank you.

Hi, good afternoon, like to know which is the tp marking for MT24256-BRMN6 and where to find the table or file, appreciate your response

We have material that have ​material as top marking 456R8 under MPN MT24256-BRMN6

Try to generate TIM1 overflow/underflow update event interrupt in center-aligned mode

Hi all,​I tried to configure STM8AF62Ax's TIM1 in center-aligned mode to generate 1kHz PWM output.​Also I'd like to generate a 2kHz interrupt by both overflow and underflow update event in TIM1.Now I can measure PWM patterns on scope, but the interru...

Hello all, How to detect that in a particular time period LIN message is transmitted or received in STM8Axx MCU? Regards, Shinde Umesh

how to force STM8S003 MCU to set UART1_RXNE_flag when receiving byte

standard IAR program. Transmit works normally ( without interrupts ).Receiving doesn't work not with flag polling, not with interrupt. I have seen in Internet similar questions, but no one answer with reasonable explanation or unconditionally working...

Loading value directly in the Index register "XL"

I am using STM8S103F2 controller in assembly language. I want to load directly value in "XL" index register in one instruction and i do not want to affect "XH" register. (Index "x" register is the combination of XH and XL). Other ways to load value i...