Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
When we wrote data at 0 location, same value getting reflected at 32768 and vice versa. Same behavior for 65536 and 98304, 131072 and 163840, 196608 and 229376. Not sure why it is writing at two locations same information even though we have written ...
I am attempting to set the output states of an L9825 using its SPI interface, but no matter what byte is transmitted, the returned diagnostic byte is 0x88 and the output state is unaltered.clock frequency : 1 MHzclock polarity: lowclock phase: data c...
This driver is used (2 per module) in a fairly new product we have been shipping 10k modules in past 6 months. Until recently, we have had no driver failures. Now we have two returns from a customer with a driver failure on each.On one unit, one chan...
I'd like to use the x-nucelo gnss1a1 module with the stm32h743zi2 nucleo board. Am I correct in thinking that there is a way to convert an example project that the x-cube gnss provides for the stm32f401re to be usable on the stm32h743zi2? If so, I ...