Others: hardware and software

i am using m24m01 eeprom i am able to read deafult values on address 0x50 i am not able to write on same

about part KF60BDT- 1) is there a PCN for the EOL of this part ? 2) is there FFF recommended replacement for this part ? 3) if not FFF - is there a substitute part / series ?

STUSB4500 Behavior Issues

I've set up two different STUSB4500 ICs, my first board, when plugged in will fluctuate its output (measured from the output of the MOSFET) from 0 to 5V every few seconds or so. EDIT: I went probing on this first board and found the 100K resistor was...

Need alternate for this EF6809P Micro processor.

I need alternate for the following component. Also I need End of Life of the alternate part is about 7 Years. EF6809P(Micro Processor)I am looking forward your valuable reply.Thanks.

How can I maximize or optimize the range of voltages the ADC can sample for a highly sensitive system?

Let me start by providing a little background on my project. I'm working on developing an avalanche transceiver. For those of you who are unfamiliar with avalanche transceivers, an avalanche transceiver is a search and rescue device used to help loca...

High Voltage Pulse Discharge

I would like to discharge my capacitor at high voltage(1200V). The load will reach 1000 A about 150-200 ns, and ring down. In order to switch that capacitor, i need high di/dt switching device. SCT50N120's diode is fast enough for my application, but...

src0 and stm6600

1.what is difference between Src0 and Stm6600? One thing I could notice is the ton_blank time.2.Why ton_blank time has a range?for example min 1.4, typ 2.2, max 3.03.What value should I consider when selecting one?

Pls help suggest the marking meaning of "1004" on M4T32-BR12SH6

Hello, We bought the part of M4T32-BR12SH6, and there are letters of "1004" on the marking. Pls help suggest the maning of "1004" on the part, Does it meaning date code?Thank you.