STM32F767 SRAM1 Address

[dohzer]

Posted on April 05, 2017 at 12:42

Looking at the STM32F767xx Datasheet (DocID029041 Rev 4), the SRAM1 address is listed as 0x20020000.

But the STM32F76xxx Reference Manual (DocID028270 Rev 2) lists this as 0x20010000 in several places:

• Page 98/1896: 'BOOT_ADD0 = 0x8004: Boot from SRAM1 (0x2001 0000)'
• Page 99/1896: 'BOOT_ADD1 = 0x8004: Boot from SRAM1 (0x2001 0000)'
• Page 112

  /1896

  : 'BOOT_ADD1 = 0x8004: Boot from SRAM1 (0x2001 0000)'

• Page 112/1896: 'BOOT_ADD0 = 0x8004: Boot from SRAM1 (0x2001 0000)'

Is this a typographical error?

#stm32f767 #stm32f767zi-nucleo #stm32f767zi-nucleo-board #stm32f7

[Imen.D]

Posted on April 05, 2017 at 14:29

Hi 

Thank you for your reported error. I will check this and come back to you as soon as possibe.

Thanks

Imen

[Imen.D · Accepted solution]

Posted on April 05, 2017 at 15:26

Hi

Doherty.Rowan

,

I confirm the error you are reporting about the

SRAM1 address in the RM0410 and should be

0x2002 0000

.

I would inform you that the reference manual will be corrected in coming release.

Thank you for bringing this to our attention.

Best Regards

Imen