Discuss hardware and software design challenges, including NOR flash storage, OTA updates, component ID, and thermal management.
the STM8 bootloader manual (UM0560 rev10) appendix B describes fewer families/bootloader versions than the erase/write RAM routines bundled with the FLASHER-STM8 v2.8.0. Specifically the newer BL versions v2.4 and v1.4 are missing, as well as the 256...
Hi,We have the STB6100 Tuner in our products, many of them are in the field.Lately we have been working on a bug in which the STB6100 cause an arbitration lost in the I2C interface.It seems that writing some specific values to the registers cause thi...
I'm helping a friend fix his battery charger. The Micro processor in it is a ST6200. Its spec has a list of Application Notes including the AN433. But a search of the ST web site failed to find it - which seems odd. Any assistance will be appreciated...
hi friends i asked my question just a few days ago but nobody answerd i dont know what should i do when i configure micro controller for cco output it generates out put of course its a little unaccurate when i check that is cco stable by checking CCO...
My CAN Network is working with 500kbps, One if the ECU had SJW(Synchronisation Jump Width) setting as 2 TQ(Time Quanta) whereas other ECU’s in Network had SJW setting as 3TQ. Will such CAN network work ? What is impact on ECU having SJW setting as 2T...
Why did Viper113XS removed from eDesignSuite?Is there a problem about IC? I need to know that because I made a design and ordered the IC, if IC has some problems I need to change it.
Cosmo has no space limited version, you can download it there, thank you!
I created a program on STM8S103F3 to generate a delay in rage of micro seconds using TIM2 module, but the timer is not ticking as expected and when I tried to call 1 sec delay using it, it is giving around 10 sec delay. I'm using 16MHz HSI oscillator...
Here I am using the STM8s003k mcu .In my application,I am configuring the external interrupts for a port .after rising the interrupt how can I clear that interrupt.If I can not clear that interrupt the external interrupt handler only will execute. I ...
