When installing some StellarStudio plugins http://*.srxstudio.org , you can meet the issue : sun.security.validator.ValidatorException: PKIX path building failed It is typical IT Issue in each corporate company. “"Path building" refers to the pro...
Dear all, We are thrilled to announce that as of today, March 1st, 2024, SR5E1 device support in StellarStudio is available to the mass market ! This means that any user can effortlessly download the official StellarStudio installation packag...
Using SPC560B-DIS Eval board, and tried UART serial example with LED, COM Port is not detecting on the Computer.Flashed the firmware using UDE through USB , LED start blinking but Virtual Com Port is not detected for UART communication.
I could not find an equivalent to this:
I need help to develop SPC560P40 CAN driver as the examples given for that is complex and difficult to understand .Is any other document or examples code available, which is simple or uses register level programming?
Is it possible to disable JTAG completely on a SPC564B MCU using software?Reading the documentation about the censorship feature, it only seems to disable access to flash. Is it still possible to access SRAM and registers via JTAG when censorship is ...
Hello everyone,Is it possible to program the SPC570Sxx series microcontrollers (specifically, SPC570S40E1) in Linux? I have been using PLS UDE-STK for programming under Windows but as far as I know there is no Linux version of that. Debugging capabil...
Has anyone had any luck setting up the SPC572L64E3 to run in Asynchronous SPI Slave Mode? I need interrupts to trigger for chip select assert/deassert, tx word push and rx word pull. I've tried using the TFFF and RFDF ISRs but it seems that the TFFF ...
Bought SPC5-CONNECT but CD-ROM did not come with.So I ask,1. Is serial number for SPC5-CONEXPLORER in the CD-ROM which comes with SPC5-CONNECT?2. What are in the CD-ROM?Can anybody help me out?
Dear all,I just ordered the SPC58EC-DISP eval kit and thought it's time to start to setup my first program. I downloaded and installed the SPC5 studio and run immediately into the following problems:When I try to install the GNU CC compiler from the ...
I am trying to connect to the SPC58EC-DISP board through PLS UDE Starter kit to program and debug the Serial Test Application example provided with the SPC5 Studio IDE. After opening the debug.wsx in the example project file on PLS UDE, an error appe...
Hello everybody,My name is Catalin and I work on an Automotive project on a gateway and I have a question regarding this microcontroler. So basically I have to wakeup the gateway every 600 seconds +/- 15 seconds and perform a voltage measurement. As ...