As @TDK​ mentioned: hovering the disabled box shows The corresponding GPIO pin is left as "Free" and ....
So you need to assign the pin context to the Cortex-M7. To do that:
open the peripheral GPIO, e.g. using the categories A->Z on the left side
select the GPIO in question (in your case PC13)
in the configuration change Pin Context Assignment from Free to ARM Cortex-M7 (NVIC1 relates to C-M7)
then either:
select tab NVIC (same page in configuration of GPIO) and tick the box at EXTI line[15:10] or
open the peripheral NVIC1 and tick the box at EXTI line[15:10] there
Does it answer your question?
Regards
/Peter
In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.
Simply tick the relevant box on EXTI Line, in this case EXTI Line [15:10]. A corresponding interrupt function is then generated by CubeMX or the CubeIDE.
You can read about the respective EXTI lines in the reference manual for the respective STM32 family.
Does it answer your question?
Regards
/Peter
In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.
As @TDK​ mentioned: hovering the disabled box shows The corresponding GPIO pin is left as "Free" and ....
So you need to assign the pin context to the Cortex-M7. To do that:
open the peripheral GPIO, e.g. using the categories A->Z on the left side
select the GPIO in question (in your case PC13)
in the configuration change Pin Context Assignment from Free to ARM Cortex-M7 (NVIC1 relates to C-M7)
then either:
select tab NVIC (same page in configuration of GPIO) and tick the box at EXTI line[15:10] or
open the peripheral NVIC1 and tick the box at EXTI line[15:10] there
Does it answer your question?
Regards
/Peter
In order to give better visibility on the answered topics, please click on Accept as Solution on the reply which solved your issue or answered your question.
