Unable to build example project for P-L496G-CELL02

[PSaga.1]

Hello Everyone,

I am trying to build the project from the pack "STM32CubeFunctionPack_LTE1_V1.1.0". I am using CubeIDE 1.12.0. Kindly help me build the project, I am new to STM32 CubeIDE. Thanks and regards. 

[KDJEM.1]

Hello @PSaga.1 ,

Could you please try to use the workaround shared in this post Issue building SBSFU with latest STM32CubeIDE 1.9.... - STMicroelectronics Community.

Also I think this discussion can help.

Please let me know if the issue is solved or not.

Thank you.

Kaouthar 

[PSaga.1]

Hello Kaouthar,

As mentioned in the doc "FP-ATR-LTE1" the project was built using Cube 1.5.1. So I have also tried the same version. I am unable to understand if the build is happening as the binaries are being generated but saying the build has failed. Attached the image. Kindly let me know. Thanks and regards.

[KDJEM.1 · Accepted solution]

Hello @PSaga.1 ,

Thank you for bringing this issue to our attention.

I confirm the issue and I reported internally.

Internal ticket number: 164647 (This is an internal tracking number and is not accessible or usable by customers).

Kaouthar

[PSaga.1]

Hello Kaouthar,

How can i follow up on the issue. Any update on this? Thanks and regards.

[KDJEM.1]

Hello @PSaga.1 ,

Could you please follow these steps to solve the issue: 

1- Install the STM32Cubeprogrammer from https://www.st.com/en/development-tools/stm32cubeprog.html and try again.

2- Set the Post-build steps in Properties > C/C++ Build > Settings:  arm-none-eabi-objcopy -O binary "${BuildArtifactFileBaseName}.elf" "${BuildArtifactFileBaseName}.bin" && arm-none-eabi-size "${BuildArtifactFileName}" as shown in the below figure:

Then Build the project.

Please use the last version for STM32CubeIDE1.13.2.

Please ley me know if the issue is solved.

Thank you.

Kaouthar

[PSaga.1]

Hello Kaouthar,

I am still getting the issue. I have attached the screenshot. I have exactly done what you have suggested. Kindly let me know what can be done I will do it as you suggest. Thanks and regards.

[KDJEM.1]

Hi @PSaga.1 ,

I think you have an issue with another project which is "\en.fp-atr-lte1\STM32CubeFunctionPack_LTE1_V1.1.0\Projects\32L496GDISCOVERY\Applications\Cloud\AssetTracker". I will check. Note that this project was built using STM32CubeIDE 1.5.1.

But firstly, could you please confirm that the build errors are solved for:

-\en.fp-atr-lte1\STM32CubeFunctionPack_LTE1_V1.1.0\Projects\32L496GDISCOVERY\Applications\BootLoader_OSC\2_Images_SECoreBin project when using the steps shared in my last reply.

-\en.fp-atr-lte1\STM32CubeFunctionPack_LTE1_V1.1.0\Projects\32L496GDISCOVERY\Applications\BootLoader_OSC\2_Images_SBSFU project.

Thank you.

Kaouthar

[PSaga.1]

Hello Kaouthar,

The changes you mentioned has resolved the issues for 1.5.1 but not 13.1. I have attached an image for reference. Now I can get started with the project. Thanks and regards.