Hello,I am trying to enable secure boot on my STM32MP157F-EV1 board. I'm following the https://wiki.st.com/stm32mpu/wiki/How_to_perform_Secure_Boot_from_Distribution_package Tutorial.The keys are created, the public hash is fused.I've added the requi...
optee-stm32mp-addons repository is not available in github. Seems to be deleted or cant be accesed.URL:https://github.com/STMicroelectronics/optee-stm32mp-addons
Using MP135F-DK board.Setup the environment and rebuild kernel.After I use openocd and gdb success connect to linux system, try to debug linux kernel, then run some simple gdb command like "bt" or do nothing, then system get reset.I did not get much ...
Custom board based on stm32mp151a. Migrating from kirkstone to mickledore and from SP_MIN to OPTEE. usart1 assigned for debuging, uart4 and uart7 for modbus communication.I cannot boot uboot with usart1 assigned as stdout-path. It boots with uart4 an...
Is there any documentation or guidance on how to configure Yocto to deploy a custom u-boot image? I've been following https://wiki.st.com/stm32mpu/wiki/How_to_configure_U-Boot_for_your_board and https://wiki.stmicroelectronics.cn/stm32mpu/wiki/STM32M...
Hi@Olivier GALLIENI have followed the steps in https://wiki.st.com/stm32mpu/wiki/How_to_create_your_own_machine#Generate_device_tree to generate a image for my specific machines dts. But when building the image the error below is generated. I have do...
ECO sources used (not git). Custom board based on STM32MP157AAA3.Both when using OPTEE in DDR and SRAM this issue occurs.The kernel reports an "cut here" and then reports:[ 0.273935] Unhandled fault: imprecise external abort (0x1c06) at 0x97638f7aThi...
Custom MP157AAA3 board. SD card formatted with ECO 5.0.0 using the SD tools using the files from the starter package. (including rootfs etc..) . Build the TF-A, OP-TEE (in SYSRAM), U-boot and kernel from the ECO 5.0.0 sources.Kernel generates the m...
Run bitbake rep and sync and DISTRO, then bitbake , it shows the EULA and the build start, interrupt the build by press CTRL-C, closing the console window and re-entering it. then start bitbake, below errors occur.Even creating a new folder running t...
The TF-A Makefile.sdk creates a small metadata.bin file for each type of boot (USB, SD-cARD, EMMC)1/ How to generates this outside of Makefile.sdk ? I use this, but is only generates one file and there seems no parameter for the type of the boot dev...