Clarification Regarding TSN Ethernet in STM32MP257-DK Board

[Aks]

Hello

We are Working on STM32MP257F-DK Board.We would greatly appreciate your help if you could help us with the following doubts:

• We Would like to How to disable ON-Board ST-link and Set it to J-LINK Mode
• We want to Check  Ethernet using build root in this board.We would like to how to identify if TSN is enabled in Linux and u boot?.If not enabled how to do it in Linux.

Thanks & Regards

Akshitha Pattem

[ahsrabrifat]

I think you can check thsi out: https://wiki.stmicroelectronics.cn/stm32mpu/wiki/How_to_configure_U-Boot_for_your_board

[Olivier GALLIEN]

Hi @Aks 

There's no alternative to on-board ST-Link on STM32MP257F-DK. 

You might consider to get a STM32MP257F-EV board where JTAG signal are accessible on MIPI10 connector

For TSN maybe following link can help 

How to configure TSN switch - stm32mpu

How to configure TSN endpoint - stm32mpu

Hope it help 

Olivier