@Kavindu_Shehan wrote:
how can i port that project to use with my nucleo board.
I would strongly advise that your first step should be to get a Nucleo-429 board, and get the Qorvo project working on that.
That way, you have a known-good point of reference from which to start your porting.
A key feature of the Nucleo boards is that they try - and, largely, succeed - at keeping pinouts consistent.
So check all the pin allocations on the Qorvo Nucleo-429 Project against the pinout for your Nucleo-466.
Once you've verified the pin connections, you'll then have to look at the Datasheets and User Manuals for the STM32F429 and STM32F446 to see how the used peripherals compare.
If you're lucky, they might even be the same!
See here for how I share common application code between projects for multiple different hardware platforms:
Solved: Re: Same TouchGFX project for multiple CubeMX file... - STMicroelectronics Community
PS:
@Kavindu_Shehan wrote:
Qorvo DWM3000EVB arduino shield
You mean this: https://www.qorvo.com/products/p/DWM3000EVB ?
Might be worth checking Qorvo Support & forum: Support - Qorvo - maybe someone there has already done it?
