cancel
Showing results for 
Search instead for 
Did you mean: 

Hi Teseo liv3F on I2C sometime stall (and on UART too), i ask for a report each second, randomly about each minute i2C tx stop for 2 to 10 seconds (sometime more) and resume.

Xynium
Associate III

I suspect a low power setting.

Tested on STM32F746Disco and on Arduino https://github.com/stm32duino/X-NUCLEO-GNSS1A1.

1 ACCEPTED SOLUTION

Accepted Solutions
Xynium
Associate III

Seem to be the STAGPS bit 4 in CDB200 should be set.

JP

View solution in original post

3 REPLIES 3
Xynium
Associate III

Seem to be the STAGPS bit 4 in CDB200 should be set.

JP

Eleon BORLINI
ST Employee

Hi @Xynium​ ,

glad to read you solved your issue!

-Eleon

Xynium
Associate III

OK

JP